模具,羊羹模具,羊羹,錦玉羹,樹脂模具,塑膠模具

  • 訂單查詢
    聯絡我們
    購物說明
我的購物車
讀取中...請稍候

商品編號:020100110000

商品編號:020100110000

PC 活動式羊羹\錦玉羹模具

TWD$ 269 ~ 299

-請選擇-
商品規格
運送&付款
運送方式
  • 國際快遞
  • 7-11取貨
  • 全家取貨
  • 電子票券(不寄送)
  • 面交自取(請先電洽聯絡)
  • 一般宅配
付款方式
  • 轉帳匯款
  • 信用卡
  • ATM 虛擬帳號

商品詳情


【PC 活動式羊羹模具 小型 700ml/大型 800ml】

此模具為樹脂材質,可耐熱至140度,耐冷至-20度,為兼用製作浮島、羊羹等寒天類菓子,以及雞蛋豆腐等萬用模具,附有把手活動底的設計,脫模更方便。

相較於較常見的不鏽鋼材質模具,活動板較堅固不易變形,使用及清洗上也較方便不易刮傷,且較經濟實惠,是不銹鋼羊羹模具的替代好選擇。

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

➻注意事項:

1. 使用前,請用清潔液徹底清洗乾淨後再使用。

2. 本產品可使用微波爐,但不可用明火直接加熱,若不遵守上述注意事項使用,產品可能會有變形或裂化的危險。

3. 於微波爐加熱後溫度很高,請勿直接徒手取出,請使用手套避免燙傷。(*加熱時間因微波爐製造商及規格而異,因此務必密切注意微波爐以確定最佳加熱時間)。

4. 請勿放入洗碗機或烘乾機。

5.為確保品質,微損品已開盒檢查,介意者請勿下單。

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

材質:聚丙烯

小型規格:內徑-136×117×45mm /外徑-170×130×48mm/容量-700ml

小型規格:內徑-144×134×45mm/外徑-175×145×48mm/容量-800ml

總重量:180g

耐熱溫度:耐熱至140度,耐冷至-20度

產地:日本

———————————————————————————————————————————————————

 

PC流し函 大 800ml/小 700ml

 

この型は樹脂製で、耐熱温度は140度、耐冷温度は-20度まで対応しています。

浮島や羊羹などの寒天類の菓子や、卵豆腐などの多用途な型として使用できます。

ハンドルと取り外し可能な底のデザインがあり、型から外しやすくなっています。

一般的なステンレス製の型と比較して、この型はより頑丈で変形しにくく、使用や洗浄も簡単で傷がつきにくいです。

また、比較的に経済的にお得で、ステンレス製の羊羹型の代替品として優れた選択肢です。

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

注意事項:

1.使用前に、必ず洗剤でよく洗ってから使用してください。

2.本製品は電子レンジで使用できますが、直接火にかけて加熱しないでください。上記の注意事項を守らない場合、変形やひび割れの危険があります。

3.電子レンジで加熱した後は非常に高温になるため、素手で直接取り出さないでください。手袋を使用して火傷を避けてください。(*加熱時間は電子レンジの製造メーカーや仕様によって異なるため、最適な加熱時間を確認するために注意してください。)

4.食器洗い機や乾燥機には入れないでください。

5.品質確保のため、訳あり商品は開封して確認済みです。気になる方はご購入をお控えください。

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

 

その他・注意事項:

ご使用後は、ぬるま湯にて毛の中まで丁寧に洗い、陰干しにて乾燥させてください。

食洗機はご使用になれません。

 

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

 

材質:ポリプロピレン

小型-サイズ内寸(約):136×117×45mm|サイズ外寸(約):170×130×48mm|容積-700ml

大型-サイズ内寸(約):144×134×45mm|サイズ外寸(約):175×145×48mm|容積-800ml

耐熱:-20度~140度

生産国:日本

 

———————————————————————————————————————————————————

 

PC Jelly Mold

 

This jelly mold is made of polypropylene which is both heat-resistant (up to 140 degrees) and cold-resistant (down to -20 degrees) .

It will be a useful mold when you making ukishima,yokan and other kinds of kantankashi. A moveable board is designed in this product to 

make demoulding easily. 

Compared to common stainless steel ones, the resin ones have stronger movable boards which are not easily deformed and easier to wash without getting hand-scratch by the sharp edges. This product will be a perfect substitute to stainless steel one, for being cheaper and more convenient.

 

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

 

Other notes:

1. Please use detergent to completely wash the mold before using.

2. This product is allowed to be into microwave, but not direct on the fire. If you don't follow the rules, the product might be deformed or cracked when using.

3. It will be super hot after heating by microwwave, so please make sure to wear gloves to prevent scald when touching it.

( The heating time will be different depands on the manufactory and specification. Please make sure to stand by and check if it has reached the best heating time.)

4. Don't put this product into dishwasher and dishdryer.

5. For quality assurance, items with defects have been opened and inspected. If you are concerned, please refrain from making a purchase.

 

❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀ ❀

 

Material: polypropylene

Small Size: inner size: 136×117×45mm|outer size: 170×130×48mm|700 ml

Large Size: inner size: 144×134×45mmouter size: 175×145×48mm|800 ml

Heat resistance: -20~140℃

Country of manufacture: Japan

 

 

 

 


PC 活動式羊羹\錦玉羹模具

TWD$ 269 ~ 299